ACOUSTIC WALLS

ACOUSTIC WALLS
Skyfold is an acoustic folding wall that is hard, rigid and flat in its down
position. The innovative design of the internal wall seals emerges as
one of the key features of the Skyfold system. Not only do they
eliminate the need for wall and floor tracks, they prevent the marring
of adjacent wall surfaces and allow Skyfold walls to be installed at
90° to each other. Extremely pliable, Skyfold’s end seals will fit
snugly against most surfaces, including masonry blocks. The flexible
horizontal seals at the top and bottom press firmly against the
acoustical barrier at the top of the pocket and against the floor.
  • acoustic

  • gym dividers
    operable_walls_manufacturers
    folding_walls

    acoustical_rating
    gym_dividers

    operable_partitions
    nms_folding_walls
    • Skyfold is an electrically operated vertically rising acoustic
    partition system that is designed to stack compactly within the ceiling
    void, thereby saving valuable floor space. A truly unique product
    ideally suited to the higher specification end of the partitioning
    market.

    The operable wall shall automatically and form an acoustic seal against
    the floor without the need for any manual intervention. The floor
    seals shall leave a joint between the floor and the bottom acoustic
    panels of not more than approximately 1 _” (45mm).

    Acoustic panels shall be faced with steel that is compatible with a
    wide variety of architectural finishes such as paint, vinyl, wall
    paper, etc. Acoustic panels, together with all of the sound insulation,
    shall be, as much as possible, made of non-combustible or fire treated
    materials. Lastly, acoustic panels shall be fabricated to be as stiff
    as possible in order to satisfy the rigid criteria when the operable
    wall is down (closed) and to ensure that there is no interference
    between panels when the wall is in motion.         		Acoustic panels enables architects to have the finish of their choice,
    provided that the finish has been approved by Skyfold to ensure
    compatibility with the wall panels. The following criteria must be
    met:

    • The maximum weight of material: .111 lbs/ft_

    • maximum thickness of material is 1/8”

    • No brittle materials.
      •

    ca-technology.net / glass operable walls / ACOUSTIC WALLS